ANTI-PUNCTURE LIQUIDS

GO SEAL PUNCTURE SEALANT

Liquid puncture-filler for tyres

Go Seal liquid sealant is a liquid puncture sealant containing reinforcing fibers. It is designed to remain fluid inside the tubeless tyre or an air chamber and seal the hole in the tread and on the side instantaneously, as soon as it appears.

HOW DOES GO SEAL WORK?

When the tyre turns, the product is poured inside the tread, ready to seal the hole as soon as it appears. The air will force the Go Seal in the hole to form a sturdy plug blocking the air leak, with a minimum loss of pressure.

Caution: Go Seal is not intended to seal cuts on the tread or sidewall punctures close to the bead. In this case, use our Go Fill product.

TEN REASONS TO USE GO SEAL

  1. It reduces repair costs, downtime, extra expenses, and visits to mechanics;
  2. It removes the need for an air chamber;
  3. It reduces travel damage to flat tyres;
  4. It substantially increases the service life of tyres;
  5. it helps reduce air leaks, and is not harmful to the environment;
  6. Save your money by eliminating costly repairs of puncutres, calls for mechanics, stop overtime and leaks from the rings;
  7. It is easy to apply;
  8. It is not harmful to the tyres: the puncture sealant is based on a propylene glycol solution in water,
  9. It lines the inside of the tyre, forming a durable seal for air, closing up holes up to ten millimeters in diameter;
  10. It guarantees you peace of mind!

WHERE TO USE GO SEAL?

Go Seal is suitable for all vehicles in construction, demolition, forestry, mining, foundries, agriculture and similar industries; it is also suitable for all industrial equipment, construction machinery, earth moving, fork-lifting trucks, and generally all vehicles that might receive punctures. Not only; Go Seal is also suitable for:

  • agricultural vehicles including tractors, combine harvesters, trailers;
  • 4x4 off-road vehicles;
  • mountain bikes, quads, golf carts, wheelchairs.

    HOW DO YOU APPLY GO SEAL?

    1. At half pressure: Place the tyre making sure that the valve is at the bottom of the wheel, around 6-8 "o'clock"; Remove the movement and attach the pump to the valve, pump Go Seal directly into the tyre without loosing air pressure.
    2. With the Go Seal bottle: Position the tyre with the valve at the bottom, remove the movement from the valve and deflate the attached tyre; Attached the bottle to the valve opening by hand and squeeze the bottle up to empty it; Replaced the movement and pump up the tyre to the pressure recommended by the vehicle manufacturer.

    CAN YOU MAKE HOT VULCANIZED REPAIRS?

    Yes, Go Seal can be washed away with the pressure washer. When the tyre is dry you can repair it hot or cold; Go Seal will have no negative effect, either hot or cold.

    TECHNICAL APPROVAL

    Go Seal is a product approved by recognized manufacturers, such as: J.I., Case, Poclain, Haitel, PLC, Ford, New Holland, Honda, ICB, Massei Ferguson, Renault and many more.

    DOES GO SEAL CONTAIN HAZARDOUS PRODUCTS?

    No! The different rubbers, mixed and processed specifically for the use in Go Seal, are combined with corrosion inhibitors, antifreezes, suspending agents, and preservatives. None of these ingredients is harmful to the skin or to the tyres and inner tubes.

    go seal danneggia le gomme?

    No! Go Seal should not be confused with similar products for temporary repairs that contain lactic acid. In fact, numerous technical tests have confirmed that Go Seal has no negative effect on the structure of the tyre.

    Share by: